PDA

View Full Version : Base Finish on an Isonics


BrianW
24th June 2011, 04:03 AM
Hi, can you tell me how to refinish the base of a 2011 Isonic?
It looks like a primer paint which has been sanded with a fine grit.
Do Starboard sell the paint to produce a proper works finish on the base?

mcross19
26th June 2011, 06:22 AM
No Starboard will not sell the paint, the best bet is to take it to a place where they mix up car paint and get them to match the colour.

Remi
27th June 2011, 08:42 PM
Hi BrianW,

Go on this page to get the correct Color : http://www.star-board.com/SpringSummer2011/products/asst_color.php

Starboard don't sell the paint because of huge transport problems (inflammable product)

Hope this help

All the best

BrianW
11th November 2012, 02:59 PM
Hi, can you tell me the manufacturer of the grey 430CVC primer?
I might be able to source some.

Thanks
Brian

Phill104
12th November 2012, 07:15 PM
Most automotive repairers should be able to supply that.

Ericred0
4th December 2012, 06:09 PM
Hi to get the finish use 600grit wet and dry......