View Full Version : Kode 112 foot pad peeling off
3rd November 2011, 08:54 PM
I have a Kode 112 2009 Wood and the nonslip surface (directly under the foot straps) has separated from what appears to be padding. The padding is still firmly attached to the deck but the top most later has "peeled" away. Can you recommend a suitable adhesive I can use (preferably one I can obtain in Australia)
Absolutely love this board so want to get it back in good shape
Hope you can help :)
4th November 2011, 05:36 AM
The same thing happened to me : only the fish-scale top layer of the footpad separated from the bottom foam black layer.
Remedy is very simple : a good quality neoprene glue. Pay attention to have the pads completely dry and clean (without sand or salt deposits) before glueing it back together. Apply firm pressure (stand on the board) all over the pads (remove the footstraps) for at least an hour while the glue is air-drying.
22nd June 2012, 07:10 AM
Hey by any chance would this product work? Bit nervous of getting it wrong
3M™ Scotch-Weld™ Neoprene High Performance Contact Adhesive 1357
30th June 2012, 02:02 PM
Hi Curt, i put new pads on my isonic with contact adhesive and it worked brill.
9th August 2012, 10:25 PM
Great! Thanks guys I'll give that a go
9th August 2012, 11:26 PM
"3M™ Scotch-Weld™ Neoprene High Performance Contact Adhesive 1357 Gray-Green, 5 Ounce Tube; part number 19887 - 3M ID # 62-1357-2631-3".
Yes, it will. A small tube is plenty enough.
For the record, I'm using m2's "Neoprenkleber", black, 35 ml, produced by
Canel Handels GmbH
Ph: 040-560 42 21
Fx: 040-560 48 37
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.