PDA

View Full Version : isonic 117wide, with Reflex II 9.2


ppeixeiro
8th December 2011, 08:06 PM
Hi, pro team.
Im 73kg, 1,76m high.
Instead of having the isonic 127, I choosed, for my bigger board, the 117wide. With 127, Im flying early, with consequent loose of control. With the 117wide, I go faster, with more control' even using the 7.8.
Now the question is: Do you think this board can go fast and work correctly with reflex 9.2, if i put a 49cm fin, the select S11? would you advise me another combination?
Tks,

nonopr
8th December 2011, 10:59 PM
Yes, It will work very good.
I have one and I mostly use it with 7.6, 8.4 and 9.2.
The 8.4 and 9.2 have been most of the time with great performance.

pfaffi
9th December 2011, 02:32 AM
maximum fin size S1 46cm with 9.2!!
Steve A. best combo/PWA results: 117W and 9.2
pfaffi

Chris Pressler
21st December 2011, 06:42 AM
Hi Ppeixero,
yeah, Pfaffi and Nonpr are totally right. And you are a light sailor. Probably you will not need a 9,2 to go in light conditions. Would bet you are fine with a 8,6 as the largest. Fins are fine from 44 to 48 cm.

Cheers,
Chris

konstas
23rd December 2011, 05:12 PM
a question the Finn S1 that I can find them
thanks

Chris Pressler
23rd December 2011, 07:54 PM
Hi Konstas,
check them out here: http://www.pfaffi.at/pfaffi_fins/S1_Slalom.html

Cheers,
Chris

konstas
24th December 2011, 04:20 AM
thanks Chris