PDA

View Full Version : How is tail width measured?


Unregistered
13th December 2011, 06:06 AM
How is the tail measurement on starboard website measured exactly? for example, the 2012 isonic 97 has 64 total width and tail width of 44.8? Do you measure 30cm from tail or one foot from tail or something altogether different?

mark h
13th December 2011, 07:34 AM
You got it man. "OFO" is one foot off or 30cm in new money:)

Remi
13th December 2011, 12:21 PM
Hi Unresgstered

And also is the outline not the tuck line for information.

All the best

Unregistered
13th December 2011, 04:43 PM
what the tuck ?

Remi
14th December 2011, 06:33 AM
Hi Unregistered

Before the rail, outline is with the rail shape

All the best

Jean-Marc
16th December 2011, 01:20 AM
Tucked under edges rails give you the full board width when schlogging (going slow).
When you are up and planing (going fast) you are riding a bit narrower contact width because the rails are tucked under their edges.

When measuring the width of the hull at one foot off, make sure to measure the outline width, i.e., the full hull width at 30 cm, not at the hull's bottom tucked under the edges width (http://www2.swaylocks.com/node/1028157?page=1).

Cheers !

JM