PDA

View Full Version : Isonic 122 problem


AJ
16th September 2007, 07:51 PM
Hallo guys, proud owner of a 122 isonic, superfast and easy to handle, but im
having spinout-problems when i ride it with a 9,2 np rss with the 44cm drake fin..Boom
is "ok" chin-high, base is "over the middle" of the track, and i have plenty enough downhaul...
Same second i try too push the board hard, i spin out.. Do i need a bigger fin, or is
the sail just too big for that board?...Its ok for "back and forth" saling, but its hard to
point upwind with this combo..7,8 with a 42 tectonic is working supersmooth for me...

thanx in advance

Duracell
18th September 2007, 12:59 AM
9.2 and 44 too small for hard upwind

Mike Nelson
18th September 2007, 03:08 PM
the 122 is a sweet board. and Duracell makes a good point - for light wind/big sail sailing i was using a 48cm (tectonic) fin

might be also worthwhile (if its a option) trying a different fin - the 07 Drakes weren't working quite as well as some other options - and the 'drake' sticker sits a bit proud as well - could be worthwhile sanding it back lightly

first preference bigger fin....

Hookipa18
18th September 2007, 03:53 PM
Interesting, do not have this problem with the iSonic 125 and Drake 44. Favorit combo is with a 9.0 Code Red. No spin outs going upwind. Ofcourse you can get a spinout with every board/fin. Actually bought a 48 fin for very light conditions, haven't tried it though.

AJ
18th September 2007, 05:32 PM
hallo mike, already looking for a bigger one..also have a brandnew 48cm tectonic..but eh, with deep tuttle..
thanx for getting back guys...