PDA

View Full Version : Phantom 320 Guidance


cafukarfoo
2nd November 2009, 04:26 PM
Hi Sir/Madam,

I just bought phantom 320.
I feel it is very hard to reach the footstrap at the back. It is a bit too far back.

I would like to reach the foot strap at medium condition.

Any suggestion how to fix that? Should i ask someone to drill some hole and move the foot strap forward?

Thanks.

honk
3rd November 2009, 09:46 AM
Is not possible to drill a new hole to move the strap forward.

For light wind, can use the beating strap by the side. Try to get the mast more upright, ( by straightening the mast-arm. ) some of yr body weight will be taken off the board too.

Will show you this wkend if you are down.

PG
3rd November 2009, 08:01 PM
If you are not planing, you don't need straps. In fact, until you are planing it should not be possible to reach the straps.

When you are planing, and have got the stance dialled, then you will find that the straps are just where they should be :-)

cafukarfoo
4th November 2009, 08:37 AM
Hi Honk,

I will go down next week. How can i find u?

honk
4th November 2009, 05:14 PM
This is Pj. at yr service. I should be down on Sunday.
See you.