View Full Version : Get 10% discount on a Deboichet fin for your iSonic 2010

4th December 2009, 02:55 PM
Hi All,

To increase the performances of your iSonic 2010, you can get 10% discount : http://www.star-board.com/2010/products/board_isonic.php

All the best

4th December 2009, 06:50 PM
Also F4 Fins can built a fin for you that will take you iSonic experience to the best possible.

7th December 2009, 03:36 AM
Yes the F4 fins work very well on the iSonics. The D2 gives superb balance and is very fast, highly recommendable.

7th December 2009, 11:28 PM
hi there checked out the f4 site,do they make slalom fins on special order only? could only se formula sized fins in their product lineup..

8th December 2009, 12:26 AM
They are in the line up as model D2 slalom sizes. Carbon fins only

9th December 2009, 10:21 PM
It's also possible to get the E in slalom sizes, it performs however best in larger sizes, ie. 46 whereas the D2 type works well in the smaller. I'm using 34,36,38, 42 and 46 in D2, and they are my favorites. Theř are fast and have a nice and free feeling, highly recommendable.

10th December 2009, 04:32 AM
I have an E Slalom size 48cm XS and it workd when it is very light wind with my 131 iSonic and a 9.2 TR-5.
I will also recommend getting the D2 XS in over 48cm up to a 54cm it is the best fin I have riden so far for all of my iSonic's ranging from 101, 111, 121, 131 and sails from 6.3m all the way to 9.2m

20th August 2010, 05:43 PM
I have a C3 D2 (original Boogie) before F4 started making them. I agree with Hank, great vin. Use it for Downwind slalom with a 6.3 sail. Fast en lots of controle.