PDA

View Full Version : Deboichet R10 for Isonic 133


Maarten50
12th December 2009, 08:15 PM
Hallo,

I can buy a Deboichet R10 54 cm.
It must be suitable for my isonic 133 ( 2008 ) + Tushingham Lightning 9,4 m.
I don't know nothing about the Deboichet R10.
Can anybody advise me about this fin??

Or is the standard fin ( R13 52 cm Drake ) or a Select RS7 51/53 cm the best choice?


Maarten

nonopr
13th December 2009, 03:13 AM
What is a R10 deboichet. I have never seen that before.

mark h
13th December 2009, 05:08 AM
nonopr, here's a pic:)

http://windsurfing.rdeleeuw.nl/tekoop/?item=deboichet_r10_54

nonopr
13th December 2009, 05:50 AM
This fin is very old and probably wont work correctly with your 133 iSonic.
The reason is the rake on that fin is not good for the iSonic.
If I were to make a decision I will rather save the money and keep using the factory fin until you find an R16sl 52-54cm or buy the select.

IRL-250
14th December 2009, 01:08 AM
I've just ordered a 50cm Vector Maui Canefire for my I Sonic 144 to use with my 9.8m and 9.0m sails as the Canefires i have in smaller sizes are such good fins and work really well on my I Sonics.
Give Jeff at Vector Maui Fins www.vectorfins.com a shout and i am sure he will be able to sort you out with a good fin for your 133

nonopr
14th December 2009, 01:47 AM
Canefires are great fins, but I have found them to be good up to 46cm in G10.
I can recommend them for sure. Also can recommend www.f4fins.com this are 100% carbon fins and they are very fast and slippery. Like them a lot more than the Deboichet fins.

Remi
15th December 2009, 06:50 PM
Hi Marteen,

This fin was for the Formula boards at the beguining. Can be good but need to be modify. Change the rake to same as the R16.

All the best

surfrider
13th January 2010, 02:59 PM
This fin was for the Formula boards at the beguining. Can be good but need to be modify. Change the rake to same as the R16.
I'm the one selling this R10 fin. I used it under a AHD GT85, indeed an older type of Formula/Wide Slalom board. the fin is a bit to small for me for the GT85, I can only use it when almost overpowered with a 8.3 Sail. That's why I'm selling it. My next board is an iSonic 115. So its much to big for the iSonic. I'm thinking about reboxing the R10 to 45cm and changing the rake to the smae rake as the Drake Slalom Pro.