PDA

View Full Version : Strange boardbag details


jgramtorp
8th February 2010, 03:02 AM
I have just bought a 2009 isonic 111 with a strange bordbag.
It was originally designed for 2006: Aero 117, Aero 127, Starsurfer S and Starsurfer M.

It has a number of peculiar details:

1: On top of the rear end it has two white pulley wheels placed on the axis of the bag (approximately 10cm and 20cm from the rear end). They can not rotate. What are they intended for?

2: Inside the bag there is a strap almost 1m long starting right in front of the fin opening in the bottom. What is it intended for?

Does anyone know the datails for this bag?

Johan
isonic 111 NP Racing EVO II 7.8

Ola_H
8th February 2010, 03:16 PM
1. It's for a set of big wheels you can attach. If you don't intend to get such wheels you can take the pulley wheels away. There is a nut and a washer on the inside and a screw on the outside. One set for each of the wheels.

2. This is to stand on when you push the board inside. Makes it easier to get the board in. Maybe not the most necessary detail...

jgramtorp
8th February 2010, 05:52 PM
Hi

Thank you very much for the info. Very helpfull!


Best regards

Johan :)