View Full Version : Fin suggestions for ISONIC 150 2010

27th March 2010, 04:21 AM

I ordered an ISonic 150 for light wind slalom. Now I'm wondering about choosing the right fin. My weight is 110 kilos. Sails that I'm going use with the board are 11m2- 10m2 race sails and maybe the 9m2. when the wind picks up I change to isonic 133.

The suggestions for the fins are: 52-62.

Any ideas which sized fins would work the best. I-ve already have 55cm fin so the 2 fin that i'm going to get are going to be the biggest end fins. I's it possible to go with fins bigger than 62 cm to get the earliest planing ...

27th March 2010, 05:23 AM
Hi Heka,

The Deboichet R13 58 is the recommand one for this board with the 11mē, but at your weight 62 will be good enough, did you try it already?

All the best

28th March 2010, 10:19 PM
Thanks Remi,

My board will arrive next month and then I will test it.

I think I will try Select Ultra 62cm and Select S10 57 cm. I have good experience from select-fins with is 133 2009 (they are much easier and faster to get here in Finland than the fins suggested.).

i'll get back here once i have tested the board.

ps. Greetings to "Blini"...