PDA

View Full Version : Vapor 9.3; Isonic 131 fin choice?


Tarantula
29th March 2010, 09:41 PM
Hello!

Which fin to choose for this combo? I am 98 kg, and I was thinking about Deboichet R16sl 48 or R16sl 50?

Thanks!

nonopr
29th March 2010, 09:50 PM
I would use. a 52cm fin and a 50cm fin from www.f4fins.com Model D2 XS

Tarantula
29th March 2010, 10:11 PM
Why not Deb R16sl?

nonopr
30th March 2010, 01:26 AM
Because:
1. they dont ship on time.
2. Quality has fallen of the wagon.
3. They dont responde to emails.
4. F4 is a lot better in quality and is faster.

Remi
30th March 2010, 06:52 AM
Hi Nonopr,

We try many fins for the iSonic 131 with our R&D Team Riders and the results was clear with the Deboichet R16 Slalom for this board.
And small compagnie with big demand have always delay as you say and quality is realy good.
If this fins are so good we would like to test them with our R&D Team, looking forward.
Did they use it actually in PWA and by who, thanks.

All the best

Tarantula
30th March 2010, 03:36 PM
@ nonopr: How much they cost? I am in Europe!
@ Remi: Which size of R16sl for 9,3;131? 48;50;52??

Thanks

nonopr
30th March 2010, 07:26 PM
Slalom fins cost about $300 full carbon and covers.
formula fins cost about $600.00

nonopr
30th March 2010, 07:29 PM
Hi Nonopr,

We try many fins for the iSonic 131 with our R&D Team Riders and the results was clear with the Deboichet R16 Slalom for this board.
And small compagnie with big demand have always delay as you say and quality is realy good.
If this fins are so good we would like to test them with our R&D Team, looking forward.
Did they use it actually in PWA and by who, thanks.

All the best

Remi contact them directly at www.f4fins.com
I am very sure they will be more than happy to provide you ith some fins for testing.
You will be surprise who is riding them in the first slalom PWA race?????

Remi
31st March 2010, 10:07 AM
Hi Tarantula,

PLease see the chart below, thanks

http://img193.imageshack.us/img193/8105/recfinstickercre.jpg (http://img193.imageshack.us/i/recfinstickercre.jpg/)


But just to know PWA Racers always use smaller for exemple Cyril Moussilmani use 48 with 9mē for 2 reason : Always down wind race and also more skill, hope this help

All the best

Tarantula
31st March 2010, 03:38 PM
Thanks Remi! I already saw that chart, but because of that reason with PWA Racers (Kevin on 47) I wasnt shure about size. I will use that fin for slalom figure 8, so I belive 50 will be enough.

Thanks again!