PDA

View Full Version : iSonic 100l 2008- question about fins


Johny
9th May 2010, 10:39 PM
Hi!

First of all I would like to say hi to everyone as I'm new on the forum.

I would like to ask You guys about what deboichet fins (models and lenghts) would You recommend for 101l iSonic from 2008 to sail with :

-2008 Gaastra Vapor 6.7,
-2010 Gaastra Vapor 7.6.

any difference with:

-Maui Sails TR5 6.6,
-Maui Sails TR5 7.6?

I am 184cm (6.0ft) and 78kg (172lb)

I sail in different conditions from relatively flat (small chop) through choppy water to wavy conditions (regular waves up to 2 meters).
Also the water I sail in differs (baltic/northern sea and mediterranean)

I also would like to ask if the variety of conditions needs different fins even with the same sails?
If Yes I would like to focus on choppy and wavy conditions because these are main conditions I want to use the slalom equipment in. I'm not a pro so that I don't have a huge budget for thousands of fins ;)

I asked about Deboichet because I have a good opportunity to buy some used Deboichet fins and maybe some of these could suit the equipment I mentioned.

cheers!

Remi
10th May 2010, 10:32 AM
Hi Johny,

For this board PWA racers was using it with SL2 profile in 34 and 38 according to your size sails. This ones should be also easy to found on the second hand market since the SL4 is the new reference for the 2009 and 2010 models.

Hope this helps

All the best

Johny
12th May 2010, 02:40 AM
Thank You very much, it helped a lot :)

Can't wait to get going :D