|6th February 2008 09:41 PM|
|mert||yeah with the x7 the cams dont work like I expected|
|6th February 2008 05:24 PM|
The X7 isn't compatable, but would work fine. I think the bend curves were slightly different between X7 & X9, but a quick email to NP would clarify that.
As far as the cams go, they self adjust to different mast widths, hence X6 & x9 rotate like a dream, its like gybing a raf sail.
|5th February 2008 05:35 PM|
|mert||hey thanx!! also one more quest. is x7 compatible with rss 6.7? does it make the cams work properly?|
|2nd February 2008 04:54 AM|
I have the RSR 6.7 and use it with a X6 mast. I have found that after about 5-6 uses it will downhaul quite nicely into the max position. This is where it works best, sometimes it looks like it has to much, but on the water the performance is outstanding. I'm mid 80 kg's and have taklen it through to approx 25 knots, with no troubles so I guess depending on the water state, 30 knots would be quite realistic.
If your aim is for GPS in dead flat water, perhaps adding another .5cm downhaul to max would work, but would feel somewhat 'dead' on a reach.
In that amount of wind I would be on a 5.8 RSR if i had one!
|1st February 2008 06:16 PM|
Tuning RSR 6.7
Hey guys anyone has an idea of how to tune 6.7 so that it could be used in high conditions like 30 knots...