|17th January 2010 07:51 PM|
There should be a difference between big boards and smaller boards.
Upright fins. 15° . Rake 30° fins. and Weedfins with 45°.
125-140liters with 7m˛-8,5m˛ 36-38cm Slalom or Freeride fin.
Rake 30° 32cm is 39cm long -
Weedfin 45° 32cm is 45cm long.
105liters-125liters Slalom 30cm-33cmRake or Freeride fin.
Rake30° 28cm is 35cm long
Weedfins 45° 28cm is 39cm long
80liters -105liters 27-33cm Slalom or Freeride fin.
Rake 30° 25cm is 28cm long
Weedfin 45° 24cm is 34cm long.
There I work doubleasymm.fins can I use the fins 2-3cm shorter. Carbon or G10?
Carbon shorter than G10. So you can see,many points.
At first: No spin out and fast. A Rake 30° fin in 22cm made with Thomas Döblin
50 knots topspeed GPS. Wolfgang
|17th January 2010 02:33 AM|
As a guide the relationship between Sail and fin size is
Times 5 add 3 !!!!
So for a 7 metre sail;;;; x 5 gives 35cm Adding 3 gives 38cm
7 metre sail (starting point) fin 38cm..
Works pretty much all disciplines !!! AS A GUIDE !!!!
Faster you go ; smaller the fin needed.. If you are going like stink on 7 metre on nice flat water you would get away with much smaller fin than marginal powered 7 metre >>
If you experience control probs;board trying to lift windward rail try smaller fin. If your mates are going upwind better than you ;try a bigger fin !!!
Experiment til you feel comfortable.
|17th January 2010 01:21 AM|
|eric b 125||
Can someone please explain to me
the relationship b/w sail size, wind speed, and fin size? I'm trying to learn about fins and their function (aside from the obvious lateral movement of the board) like tail lift and drag. I know there's a lot of information as far as this goes, i'm just looking for the basics. thank you so much for your help!