|10th April 2012 01:18 AM|
I believe that any normal "twist on" type mast base/uni with an 8mm x 1.0 thread will work.
Just measure the depth of the insert and ensure the threaded portion of the mast base is a few
cm shorter so the round plate seats on the board to take the side loads.
|10th April 2012 12:44 AM|
What mast base for 12.6 SUPer?
Can anyone tell me what mast base goes with the 2012 12.6 SUPer? The board doesn't have a mastrail but two inserts instead.