|14th March 2008 06:05 PM|
I measured the distance between the screw holes in Starboard models a few years ago. There was a difference of a few mm between the widest and narrowest. With the narrowest spacing I could not get my foot into the strap, when it was set in the normal width. I have an extra wide foot and need a 45 boot. Using an extra hole to gain width allowed me to use the straps but at that stage they were too wide.
In a board that had a wider spacing between the screw holes I could use the straps in the normal setting. Others complained that the straps were too loose on that particular model. Obviously one size does not fit all.
Dakine Core Contour straps rise very close to the mounting screws and allow me to use a boot where I could not do so otherwise.
Many Starboard straps have a lot of bulk near the mounting screws. This results in difficulty in inserting wide feet.
There is an opportunity for some manufacturer to make a plastic fitting which would allow users to set the width to their own needs. The adjustment in straps is a height adjustment. A width adjustment would have to be at the point where the straps are mounted.
|14th March 2008 04:07 PM|
|seasharp||The Ultralight straps, when wet, seem to grip on to the latex of my Atan boots they may be OK with conventional neoprene boots. I have realised though that if you don't use the screw covers on the regular straps you can extend the straps as far as you want. It is only the screw covers attached to the neoprene sleeve that stop the straps from stretching and also cause them to retract when not in use. Wondering if I should have bought a JP Super Sport – no hassle.|
|13th March 2008 09:40 PM|
|Ken||I may have to retract my earlier statement about the straps on my Isonic 111 being too small. I got out yesterday (8th time on the board) and the straps keep streatching. Front straps are almost too big now and the back straps are a bit snug, but ok.|
|12th March 2008 04:10 PM|
Strap Manufacturing defect?
Well I have tried everything to make them big enough and have ended up having to buy a set of Ultralight straps from a friend. Reading the last post I am now wondering if there has been a faulty batch of straps made. The bottom line is is that these just aren't long enough.
|11th March 2008 03:49 PM|
I had the same problem some weeks ago using for the first time my futura 111 (with shoesize 46 in winterboots).
No problems with my isonic, but the Futura-straps are indeed somewhat smaller, but in some weeks I hope it's already summer-boots time instead of those 6mm thick winter-boots.
|11th March 2008 02:44 PM|
Try Starboard RACE straps (so big) and use "next hole" when screw to make it "wide" enough.
|11th March 2008 10:33 AM|
Starboard uses fine quality straps, it's the holes that are too close together.
The holes are fine for 42 wide, but for a 46 wide / 47, in booties, the only way I can get them to fit is to spend 30 minutes a strap taking them apart and trimming away the neoprene on the sides (i.e., right where the strap stick up from the board). The neoprene isn't really functional in this area anyway, if you wear booties.
The solution would be a third row of holes, at each end of the strap. Not much more weight, lots more functionality, still fewer holes than some boards.
The strap SETTINGS are one thing about Starboard that I detest.
|11th March 2008 08:31 AM|
Thanks for the suggestion. I think I have the board pretty flat, but I will try the toe pressure a bit more and see if it helps.
|11th March 2008 02:53 AM|
I now have 3 iSonics and love them all but the 87 is my favourite.
|11th March 2008 01:10 AM|
I have an isonic (same straps), but the hole locations may be different than the Futura. However, I have 45/46 feet (US - 12) and the staps after 8 outings and several re-adjustments are still too tight with winter booties. They are OK but hopefully they will continue to stretch.
I haven't tried the crow bar except with my hand and arm.
The problem with the isonic is that the straps are so far outboard, so I have to rotate my feet in the straps to keep them from catching in the water.
|This thread has more than 10 replies. Click here to review the whole thread.|