Go Back   Starboard Forums > Free Forum > North Matchrace Cambers

Thread: North Matchrace Cambers Reply to Thread
Your Username: Click here to log in
Image Verification
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Additional Options
Miscellaneous Options

Topic Review (Newest First)
16th May 2008 03:38 PM
John Kemsley Thanks guys
15th May 2008 02:10 AM
mark h I used to love the old NS matchrace, I had the 7, 7.8 & 9m. I was'nt using North mast then. Arrows 490 in the 9 & 7.8, and a Tushingham in the 7m. Like unreg says, grind alot of the cams to make fit but rotation is'nt good (never was on the matchrace). I ended up changing the cams for Gaastra nitro cams, these worked brilliantly, easy to rig and rotat.
15th May 2008 12:40 AM
Unregistered You will most likely have to grind the cams a bit. I'm using a match race with an old fat dynafiber mast and the cam arms were originally too narrow and the rollers did not touch the mast. The solution was to take dremel and sand paper. Take out the cams from the sail and place against mast and you will see how much you need to take off.
Don't sand too much or the cam will pop off the mast. But you definitely want to take off enough so the rollers smoothly move against the mast itself with no friction. I took off a lot and didn't have problems. The sail rotates stiffly and it needs a punch/kick but from what i've read online this is problem even when rigging on recommended mast.
14th May 2008 05:46 PM
John Kemsley
North Matchrace Cambers

Help! Has anyone used a North Matchrace on a "normal" diameter mast? My new mast will be normal sized, will the cambers be to big/tight? Any solutions>

Regards

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT +7. The time now is 06:31 AM.