|20th October 2008 03:24 AM|
|Hank||Your welcome, I don't have a 430 Red Line, but a Severne Blue Line (75%) 430. Am not sure if I'm able to measure it properly. Let me know if your looking for the Red or if Blue is ok.|
|18th October 2008 11:58 PM|
|Unregistered||meant to say thankyou Hank- that link was useful but realy im after the bend of the 430!|
|18th October 2008 11:55 PM|
I would still like the bend offsets for the severne redline rdm masts.
does anyone from severne have them or do you guess? :-) thanks!
|9th October 2008 01:23 PM|
Yes, it is a great database, but it only has data for the Platinum 550, and the bend characteristics are changing between the sizes.
Another thing that I am curious about is the standard deviation of the bending characteristics for a specific mast model. I guess they vary quite significantly. Adding to this are individual variations in sail cutting and sewing between sails of the same specs.
Some sails are not so sensitive to variations in mast characteristics, but others are, and then there is a lottery to get a perfect matching sail and mast. Maybe it is like selecting cross country racing skis, where you have to test lots of identical looking pairs on the snow to find out which ones that are competitive?
|9th October 2008 03:52 AM|
Have a look at this page - it contains data of mast characteristics:
|9th October 2008 02:06 AM|
According to the test in the German Surf magazine, the Severne RedLine RDM 400 cm has 63.5% bottom flex and 73.3% top flex, i.e. IMCS 9.8. The IMCS stiffness was measured to 18.0.
I am also searching for mast bend characteristics, but for the North Platinum 490 cm and 520 cm masts. Anyone?
|9th October 2008 01:26 AM|
Does anyone have the bend offsets for the Severne Redline rdm masts?