|30th August 2009 06:29 PM|
very interesting post! I played a lot with fin sizes on the iSonic 122 2009 and went up to 48cm, which gave me solid speed and control. My weight is in between 83 and 85 kg. But after testing with teammates, especially with Jesper Orth, I realised, that my gear was trimmed too extreme. Boom too high and masttrack too far back. Now I came back to an average trimm: enough downhaul, mastbase around the sweet spot (recommended position), 44 fin, front straps middle, backstraps middle or back and boom much lower by 5-8 cm.
The result: more comfort, better locked sail, more control in the jibe and no spinouts, because my bodyweight sits deeper.
Try this out and you will perhaps decide to get a 46 or 44 inside the board. If you will be powered up on the 48, you can realize that the board starts to work a lot along its midleline and doesn´t fly so stable over the water, how it should. Just watch the nose of the board when you feel that the whole system gets powered up. With a shorter fin you will have much more stability. But it depends, what you are looking for: a gearset, which works great on the upwind or a set, which should be a winner on the downwind. And the watersurface has a big influence on your trimm. I would suggest to have at least 2 finsizes for the 122. So you can pimp the board in lighter wind with the 48 and get the best tuning in stronger conditions with a 42 or 44. Depends on the model.
|27th August 2009 04:36 PM|
Tanks for all responses. I bought a Drake r13 sl 48. I have tried it a couple of times and it works perfect for me. Mutch more speed, no spin-out and that gives me easier jibes.
|24th August 2009 06:54 AM|
Please try this : remove the fin sticker by sanding with minimum 600 gr and all the fin from base to head, it should be stop your spin out.
All the best
|22nd August 2009 05:32 AM|
I alternate between Drake 40 & 42cm fins with 8m GTX depending on sea state
but I'm quite happy with Drake 46cm fin for 9m Vapor whatever the conditions.
I'm 72kgs and prefer to use a seat harness to keep the weight off my feet.
|14th August 2009 10:22 PM|
First of all you have to be sure that it's a fin and not a sail problem that makes you spin out. I (95 kgs) have an iS 122 and I don't have any problems with my Drake 46 with a 8.5 sail - except that it actually feels a little too big - and I can use the Drake 40 comfortably (and faster) with the 8.5 when the wind is higher and steady.
How is your sail trimmed? Do you use enough downhaul (lots of surfere don't), and do ylu have an adjustable outhaul? What about foot strap position? Are you in balance on the board?
|14th August 2009 07:35 PM|
Agree with Papounet you have so much control with the Venoms.
I use the 46 with my IS122 and Loft Blade 8.5 and wow the boards really does trim nicely.
The Venoms dont seem to try and overpower you like some other fins, I use this combo up to 25 knots im 85kg.
|13th August 2009 10:20 PM|
Canefire is a fine fin, but iSonic 122 dont need as powerfull & stiff ones
Very fine at all for Fanatic Falcon 07/08.........
I was very pleased of the Tectonics Tomcat 42 with 8.4 on iSonic 125,
but the testing of the C3 Venom 40 with 7.4 throw me on an other world.
The board flyes flat over the water & feel free as never.
40 is Ok for flat water & well powered, otherwise 42 is a good choice with 7.4.
46/48 is nice for 8.4 see under
By Ian Fox
|12th August 2009 07:02 AM|
|IRL-250||Get a 44-46cm Vector Fins Canefire. They are an awsome fin|
|10th August 2009 02:36 AM|
|Lessacher||Rake 30°, 35cm is 43 cm long,no spin outs, very fast and 100% carbon. Wolfgang|
|8th August 2009 07:47 AM|
|blazer||I've suffered with spinout with the stock 44cm fin as well. Finally considering an upgrade. I'm 74kg and primarily use it with an 8.2 Vapor. Not racing just enjoy fast reaching. 44cm or 46cm?|
|This thread has more than 10 replies. Click here to review the whole thread.|