Go Back   Starboard Forums > Free Forum > Sails, masts and booms! Oh my!

Thread: Sails, masts and booms! Oh my! Reply to Thread
Your Username: Click here to log in
Image Verification
Post Icons
You may choose an icon for your message from the following list:

Additional Options
Miscellaneous Options

Topic Review (Newest First)
29th August 2009 01:25 PM
Windman Hi, Dave,

Firstly, your question may be better answered by directing it to rec.windsurfing in the USA via this link: http://groups.google.com/group/rec.windsurfing/topics.

My 2 cents:

This F2 model is about 103 litres and will match your weight reasonably well, although in heavy air I suspect your light weight may count against you. It will NOT do everything, but will do most things that you want to do (it is a slalom board with no rocker for waves. It has a slight vee, which aids gybing. Its construction has an ASA skin, which makes it a tough board). The equipment has changed radically over the years and should be easier to use and more versatile.

In answer to your questions:

I am a Neil Pryde user, so my bias is to their products (but others can help you quoting their own experiences).

Fin: one fin can't do it all. The fin used in the F2 is a Powerbox type. I'll suggest 3 fins to cover the sail range of 6.7 down to 5.4.

36/32/28, slightly swept back (and don't forget to buy a couple of fin screws and washers). Also, make sure that the fin screws do not bottom out in the fins when the fin screw is tightened.

Mast base: NP tendon, UXT type

Mast: NP X6/430/SDM. Nowadays, it is vital that the mast and sails come from the same manufacturer, for maximum performance of the sail. If cost is a consideration, you can compromise.

Sails: Hellcat 6.7, Alpha 6.2, Alpha 5.8, Alpha 5.4. Hellcat for slalom, Alphas for slalom/B & J. Downhaul all sails to maximum and adjust power using the outhaul.

Boom: NP X6 160-220 or Maui Sails Wave 160-210. Both booms have fully articulating heads, which reduce point load on the mast, lessening the chance of breakage. Both booms are very easy to adjust lengthways.

Mast extension: NP X3 UXT 34.

Please visit the NP and Maui Sails websites to review my suggestions.

Hope this helps,

29th August 2009 08:25 AM
Sails, masts and booms! Oh my!

Hi everyone. I hope nobody will be offended by my posting this question here. I have an F2 Ride 274 that was given to me, and now I must purchase all of the parts I need to use it. At one time a very long time ago I windsurfed for about two years on Mistral longboards, and I'm now trying to get back into the sport with very little knowledge of how the equipment has changed.

I'm 5'8", I weigh 142 lbs and I'll be sailing in New Mexico, where the winds are either very light or very heavy. I'm trying to figure out what I should buy - what fin, what mast base, what mast, what sail, and do I need a mast extension? Can anybody help me or direct me to a good FAQ?


Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT +7. The time now is 07:02 AM.