|24th January 2010 08:35 AM|
Did you mean roll on uv Epoxy resin or Polyester resin? Because I don't think it's a good idea to coat the board with polyester resin it won't bond well to epoxy. Also you might want to take a look at this product.
http://www.paddlesurfwarehouse.com/m...le-boards.html or use the stuff Remi said, a friend of mine has used it and it worked well for him I think he said he did two or three boards with the two part kit. good luck. Cheers. Michael
|21st January 2010 04:53 PM|
I use the Nautix one to fix this problem and is perfect.
Hope this help
All the best
|21st January 2010 04:13 PM|
Not sure about the sugar thing, but you can get spray on and roll on re-grip products that would probably be better that sugar
Plenty of choice around, here's one link to Gunsails version:
|21st January 2010 12:53 PM|
Regripping 2006 Isonic
just bought a 2nd hand 2006 Isonic 115 and the decks a bit on the slippery side. Thought i'd re do the deck the usual way - wash clean with acetone, mask up area and then roll on a thin coat of polyester resin (UV stable) then sprinkle with sugar.
Any comments or advice?
I've recently done my old Windtech this way with good results but i'd completely stripped that back and repainted it. With the Isonic i'll be leaving what grip there is left and adding to it.