Go Back   Starboard Forums > Free Forum > fins for isonic 144WC

Thread: fins for isonic 144WC Reply to Thread
Your Username: Click here to log in
Image Verification
Post Icons
You may choose an icon for your message from the following list:

Additional Options
Miscellaneous Options

Topic Review (Newest First)
24th May 2010 05:35 AM
mark h Hi Alex
9m & 10m with the RS7 51cm is good, I'd go as far as to say its nearly formula angles in 15 knot winds, lighter winds and it is OK. I also use a RS Ghost 57cm for supe light days (8k to 10k), bigger than recommended but helps to keep speed and angles up.

As Pieter says, good things are being said about the new C3 Sting, more lift and power than the older Venoms. Good prices as well
24th May 2010 01:39 AM

I have a isonic wc 144 / NP EVO II 9.5 and use a C3 Sting 52 cm for matchracing, 50 cm for down wind slalom. Ultimate top fins for use in competition (my weight 96 kg).

Best regards,

24th May 2010 01:32 AM
Unregistered HI Mark,

will jump into that topic since I also recently got my Isonic 144 and would like to know if you could comment about the upwind performance with a 9 or 10m sail and Select 51cm?

23rd May 2010 12:43 PM
Unregistered Thanks a lot Mark.
23rd May 2010 02:23 AM
mark h Hi,

If your just going fast with your mates or weekend club racing, dont be put off getting the cheape Select or Drake fins. While the Deb's are really nice fins, its difficult to justify the price premium for a few percent increase in peformance.

I'm 105kg and like lots of back foot pressure on this board. I'm using for 9m & 10m a Select RS7 51cm. Its a good compromise for power/speed. Iv'e had about 33k peak with both 9m and 10m, so its definetly good for mid thirty knots on the right day I know that the new Select S10 is working good on the iSonic's.

Like the Selects, the Drake R13 is a decent low cost fin, but the Select is defenitly a much nicer fin. Not tried the Deb R13 in a 51cm size on my iS144, but I'm sure that will feel much nicer than Select and Drake, but only slight improvements
22nd May 2010 05:08 PM
fins for isonic 144WC

which fins would you recommend for the Isonic 144WC with a neil pryde slalom mkIII 9;5 and a north stype 8,4?

My weight is 100kg and I put a lot of pressure on backfoot.

My options are select and deboichet. Select is the easiest to get.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT +7. The time now is 02:19 PM.