Go Back   Starboard Forums > Free Forum > Jump

Thread: Jump Reply to Thread
Your Username: Click here to log in
Image Verification
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Additional Options
Miscellaneous Options

Topic Review (Newest First)
7th January 2007 11:04 PM
Guest
RE: Jump

finless? sounds interesting... are you able to jump finless? :-S
nick
7th January 2007 09:06 PM
-Lampi-
RE: Jump

So finless sailing can only be done in light winds?
7th January 2007 08:35 PM
Russell
RE: Jump

Lampi when sailing a board backwards you are not using the fin.

Practiciing with out a fin gives you a better feeling for keeping rig and body in balance and moving smoothly. It means you can practice in very light winds sliding around. When you are powered up and using a fin,in fact when you are sliding you are not using the fin.

You can start with any of the basic arial moves, in fact the volcan is probibly the hardest as it requiers a rig change.
6th January 2007 03:17 PM
-Lampi-
RE: Jump

Ok here is my question: Finless??? How can you go anywhere without a fin? I've heard of people using very short fins (i use 22cm and 14 cm) but finless?
How can that work? I'd be really happy if someone would tell me how to do that so i can try it some day...
6th January 2007 05:19 AM
GEM
RE: Jump

A lot of people are cutting the fin at not much more than a hands width - 18 cm would be max. Taking their freestyle or small wave fin, and cutting it. I used a Dremel tool. You then need to sand / fair the leading edge and tip. in Bonaire, a lot of the kids practice finless, too. I guess the basic point is that it doesn't matter a lot, just cut it short. Weed fins work good (after they're cut), probably because cutting it doesn't really screw up the shape of the leading edge at the tip.
6th January 2007 03:23 AM
-Lampi-
RE: Jump

I think that you shouldn't worry about the board. Try getting a fin that is about 20 cm or maybe a little smaller.


6th January 2007 12:38 AM
Guest
RE: Jump

yes I've heard that it's a tough one to learn.. and I think I have to be a bit more stable in my jumps before I start practising them.

My weight is 54kg. and I'll use a 90l. board for freestyling (wondered if that's the right size when I'm going to start aerial moves though? too small?).
Sailsize is normally 5.0.
6th January 2007 12:25 AM
-Lampi-
RE: Jump

HI

You can practice swich stance, that helps you a lot when you start to land them in backwards, but otherwise i'd reccomend you just to go for it. It took me quite a lot of time to learn the Vulcan so don't give up!

The fin size really depends on the boards and sails you are using and your weight, so it'd be good to know that to tell you what size to get.

Generally a freestyle fin should be about 18-22 cm long. For me the important thing is that the shape of the fin is right (it's not too good when you are using a wave fin...).


5th January 2007 10:40 PM
Guest
RE: Jump

Thank you Lampi for the link, it looks great and very usefull to me - perfect to see the move from so many diffrent angles. Do you have a tip for some moves to learn before the volcan, that will make it easier to me to learn the volcan?

GEM - you are right with the short freestylefins, right now I'm using 23cm freestyle fin, but I know that it's long for a FS fin.. What size will you recommend?
5th January 2007 10:11 PM
-Lampi-
RE: Jump

Hi!

In my oppinion the Volcan is the ideal place to start aerial freestyle because it gives you the basic feeling of sliding around on th nose of the board and sliding in reverse.

I have never really tried willy skippers but i guess they're a good place to start. I have heard people say that the Willy skipper is the ultimate board breaker though...

When i was learning the vulcan, this article really helped:
http://www.guycribb.com/userfiles/documents/vulcan.pdf

All the best!

Lampi
This thread has more than 10 replies. Click here to review the whole thread.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT +7. The time now is 06:38 PM.