Go Back   Starboard Forums > Free Forum > 7,0 on Isonic 127

Thread: 7,0 on Isonic 127 Reply to Thread
Your Username: Click here to log in
Image Verification
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Additional Options
Miscellaneous Options

Topic Review (Newest First)
24th July 2013 09:18 PM
Coqrouge This is the threadstarter.

Monday I tried my IS127 with 7,0 and 46cm Drake Ready to Race DW fin. Wind was 13 m/s - 16 m/s. Mastfoot 2,5 cm behind centre. The board behaved very well and speed was occasionally well above 28 kt.
Struggle a little bit to get good angle upwind with this set-up. When going upwind in the chop, the board hammers against it, but the ride is not unpleasant. Going with the chop or with the chop from side, the board is just super.

All in all, this was a very positive experience. This board is really fantastic with sails from 7,0 to 9,5.
24th July 2013 08:30 PM
Pelegrin Friday and tuesday I went out with 127 carbon 2011 with NP Evo ll, 5,5 and it worked ok in bumpy water and 13-15 m/s. The days between it worked ok with Gaastra Vapor 6,7 in 8-13 m/s. Spot is sea but ot open sea. Speed in jump and bump 23-26 knots.
11th July 2013 01:35 PM
Macka Packa Yep, and i had a ball! Last winter had a VERY gusty day, 5-25kts. I used the 127, 7.0m combo with a 44cm G10 Canefire. I was planing more consistently than most others and I think I pulled a 30kt that day. Just remember to put the mast base a little further forward than the bigger, heavier rigs.
9th July 2013 10:54 AM
Unregistered
7,0 on Isonic 127

My weight is 95 kgs, sailing an Isonic 127. Using mainly 9,3 and 8,4. with 50cm and 48cm fin.
Anyone tried a 7,0 full race sail on IS 127 ? and what fin size should be used ?

coqrouge

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT +7. The time now is 02:04 PM.