Go Back   Starboard Forums > Free Forum > dents

Thread: dents Reply to Thread
Your Username: Click here to log in
Image Verification
Post Icons
You may choose an icon for your message from the following list:

Additional Options
Miscellaneous Options

Topic Review (Newest First)
8th May 2007 06:02 AM
RE: dents

Products - Assistance - Repair Guidance

Explains all, including the consequences of using the wrong kind of expoxy. :|
7th May 2007 11:04 PM
RE: dents

Impact dents in themselves often happen and there is little that can be done to resolve them. However, if the deck of a board lacks the expected robustness and starts breaking down due to repeated application of pressure, the situation will ultimately lead to delamination. It's only after the delamination has occurred can epoxy be injected with any chance of success. I must emphasize that the fix is only really workable if the area is relatively limited in size, and it's only really a crude stopgap repair. In reality, repairs of this nature often can have mixed results, and it's a usually a strong indicator that one needs to plan on buying a new board.

To inject epoxy into the board, a small hole needs to be drilled into the center of the delaminated area, and a syringe is used to inject it. It's important not to make too hot a batch, as that can lead to other problems.

7th May 2007 08:08 PM
RE: dents

7th May 2007 06:33 PM
RE: dents

How did you inject the epoxy? I have a board which has a few "dents" which are rather shallow on the front from times that the boom head has hit it. I figure it's just the price one pays for having light thin skinned boards.
6th May 2007 11:06 PM
RE: dents

Hi Barry,

If I was you, I would immediately contact your dealer about the problem. Given the fact the board is new and appears to be reflecting a problem of this nature, it's very likely that the situation will quickly get worse with time and it will undoubtedly lead to a major delamination. At minimum, it's always good to get on record when something isn't right.

I had this type of problem with two of my boards, but it took quite a few years to develop. In both cases, an injection of epoxy through the deck helped sustain the viability of the boards.

6th May 2007 04:18 PM
Barry Spaulding

hi all has any one else had this problem , when its choppy and i do a gybe the deck of my new carve 133 gets dents where i place heel , this board is only new and wonder why this is happening never had this prob before with other boards regards barry

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT +7. The time now is 03:24 AM.