Slot box versatility
I just wanted to ask which 'aftermarket' fins adapt easily to the new Slot box system?
I've now got a Quad Q and this seems an opportunity to experiment with fins in different sizes that I already have. Trouble is the old fins are in different head formats.
I'm guessing I can cut down an old US box fin to box length and then rebate hollows in the sides of the head to fit a slot box – is this practical?
But what about mini Tuttle heads? Will they fit in the new Slot box?
Also, can FCS fins be made to fit?
Adapting a us base is the easiest. Just cut to shape and cut the recesses in the sides. That might require a bit of tinkering, depending on which tools you have.
For fcs, you have to mold a new base and then cut the recesses. Not super difficult. Let me know if you want instructions.
MT bases are thicker, so you need to sand them down. But they are also less deep and less wide. I have remolded a few, but it requires some more work than remolding fcs. I prefer to let the sanded mt base "bottom" in the slot base mold and hence "steal" around a 1cm or the upper part of the fin (which gets molded into the new base.
For practical purposes, us base fins is by far the easiest. I hope we're gonna se fin manufacturers pre-cut the recesses into the us base fins soon. Then it will be super easy to convert.
|All times are GMT +7. The time now is 12:49 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.