Starboard Forums

Starboard Forums (http://www.star-board-windsurfing.com/forum/index.php)
-   Ask Our Team (http://www.star-board-windsurfing.com/forum/forumdisplay.php?f=10)
-   -   grainy bottom surface of the freesex wood (http://www.star-board-windsurfing.com/forum/showthread.php?t=1232)

slajder 18th February 2007 10:07 PM

grainy bottom surface of the freesex wood
 
Hi

I bought a Freesex Wood 3 weeks ago (testboard, authorized dealer, 2 year warranty).
I surfed last week, and after I noticed 5-6 pieces of paralel bursts on the bottom next to the fin. They were rather to taste than to see.
Today I surfed 3-4 hours and now there are thousands of similar burst everywhere on the bottom! :-((

What is the cause, can it be worse, and is the warranty applicable for this?

Thanks Leslie

Ola_H 19th February 2007 01:54 PM

RE: grainy bottom surface of the freesex wood
 
Its very difficult to assess what this is from a written description only. The ablsolute best thing is to take it back to the dealar and have them look at it.

slajder 19th February 2007 02:33 PM

RE: grainy bottom surface of the freesex wood
 
I think the bottom surface must be totally smooth. Had anybody such experience with the wood laminate? I think the very thin (unfortunately "limited finish") painting and the wood bottom can't resist the small waves bombarding the surface.
I am afraid in a few weeks I can rub off the painting with my fingernails:(

Ola_H 19th February 2007 04:48 PM

RE: grainy bottom surface of the freesex wood
 
I had a Freesex with that finish that did not develope any pecularities on the bottom surface. I think it must be a problem with the finish on your particular board, so again, try to get the dealer look at it.

slajder 19th February 2007 09:55 PM

RE: grainy bottom surface of the freesex wood
 
Thank you for your reply

It's a sticky thing, as I arrived home I watched once more the bottom of my favourite board and the bursts were getting flatter, most of them disappeared :o
But a few of them are present, especially where the paint is very thin (the original color of the wood is to be seen).

I hate this "limited finish". With a normal thickness painting it would be perfect and less vulnerable.

2 more questions and I don't disturb you with that problem

1. What dou you think about the real value of this limited painting? I mean this is simply marketing, not a pregnant weight save (but cost save surely...)
2. How does affect the flaking off of the painting the water impermeability? (should I always repair?)

Thanks once more



Ola_H 21st February 2007 01:56 AM

RE: grainy bottom surface of the freesex wood
 
1. I don't know what the weight difference might be, 100g maybe. But I also don't think the "stonewash" finish is neccesarily any weaker. With thicker paint, you can always get into problems with the pain flaking if you hit in. Starboard still has this kind of finish on many race boards, and they sell many, many of these every year, so that is why I think your problem relates to your particular board and not the finish as such.

2. The wood is impregnated and "sealed" but since I don't know exactly what the problem is with your board I would again say the safest thing is to let the dealer have a look at it as soon as possible.

slajder 21st February 2007 03:12 AM

RE: grainy bottom surface of the freesex wood
 
Contacted the dealer and his opinion: the very cold water and weather (both 4-5 degrees) made the gelcoat layer very rigid and therefore fragile. Soon must be replaced, of course warranty available.

Thank you for your help

Ola_H 21st February 2007 03:50 AM

RE: grainy bottom surface of the freesex wood
 
OK. I hope everything works out OK.

Cheers,

mikel 21st February 2007 03:55 PM

RE: grainy bottom surface of the freesex wood
 
Hello I had a formula that the stiks had bubles and with heat they do something as you sais. can be something similar. is behind the stiks?.


All times are GMT +7. The time now is 10:39 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.