Kode 112 foot pad peeling off
 

Hi Guys/Gals
I have a Kode 112 2009 Wood and the nonslip surface (directly under the foot straps) has separated from what appears to be padding. The padding is still firmly attached to the deck but the top most later has "peeled" away. Can you recommend a suitable adhesive I can use (preferably one I can obtain in Australia)
Absolutely love this board so want to get it back in good shape
Hope you can help :)
Cheers
Curt

Curt,

The same thing happened to me : only the fish-scale top layer of the footpad separated from the bottom foam black layer.

Remedy is very simple : a good quality neoprene glue. Pay attention to have the pads completely dry and clean (without sand or salt deposits) before glueing it back together. Apply firm pressure (stand on the board) all over the pads (remove the footstraps) for at least an hour while the glue is air-drying.

Cheers !

JM

Hi JM

Hey by any chance would this product work? Bit nervous of getting it wrong

3M™ Scotch-Weld™ Neoprene High Performance Contact Adhesive 1357

Cheers

Curt

yup
 

Hi Curt, i put new pads on my isonic with contact adhesive and it worked brill.
Eric

Great! Thanks guys I'll give that a go
Cheers
Curt

"3M™ Scotch-Weld™ Neoprene High Performance Contact Adhesive 1357 Gray-Green, 5 Ounce Tube; part number 19887 - 3M ID # 62-1357-2631-3".

Yes, it will. A small tube is plenty enough.

For the record, I'm using m2's "Neoprenkleber", black, 35 ml, produced by

Canel Handels GmbH
Grandweg 66
D-22529 Hamburg
Germany

Ph: 040-560 42 21
Fx: 040-560 48 37
Email: canelhamburg@t-online.de

Cheers !

JM