Starboard Forums

Starboard Forums (http://www.star-board-windsurfing.com/forum/index.php)
-   Ask Our Team (http://www.star-board-windsurfing.com/forum/forumdisplay.php?f=10)
-   -   Z-Fins/iSonic-for Remi (http://www.star-board-windsurfing.com/forum/showthread.php?t=15788)

mark h 28th November 2012 08:04 PM

Z-Fins/iSonic-for Remi
 
Hi Remi

What rake is working best on the iS107 and 137? I was told 5 and 6 degrees but this was on other brand board.

:)

Marko CRO169 29th November 2012 04:51 AM

... And also for 117w 2012?

Regards,
Marko

Remi 30th November 2012 02:15 PM

Hi Mark H

The standard one from Z Fins work very well on the iSonic but in Soft -

All the best

mark h 30th November 2012 05:44 PM

Thanks Remi:)

Chris Pressler 11th December 2012 09:51 PM

I would recommend 38 cm for the 107, 44 or 46 for the 117 and 48 for the 137. These fins work excellent on the i-Sonics.

All the best,

Chris

SeanAUS120 12th December 2012 10:52 PM

Quote:

Originally Posted by Chris Pressler (Post 58778)
I would recommend 38 cm for the 107, 44 or 46 for the 117 and 48 for the 137. These fins work excellent on the i-Sonics.

+1 on these fin sizes!

mark h 13th December 2012 10:35 AM

Any one know what rake Z-fins are using? I know that they give you the option of 3, 4, 5 & 6 degrees rake on the trailing edge. I was guessing that 5 or 6 degrees would be best

mark h 14th December 2012 08:52 PM

Its ok, I found out today that 5 degrees works best:)

Marko CRO169 14th December 2012 09:03 PM

Where did you find that?

mark h 15th December 2012 02:45 PM

Some one checked their Z-fin for me!


All times are GMT +7. The time now is 01:12 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.