I have a big problem by buy a new board: I cruise since 2002 with a GO 170 year 2002(for me the best board from Starboard!!!), that now beginn to be old....I normaly cruise on the lake with wind from 9 knt to 25knt ( 3 sail : 6 and 7 and 9 m2) and I weight 75kg. I enjoi freerace/freeride. Wind condition are mostly beetween 8-15 knt (sometime untill 25 knt).I enjoy early planing but also crusie in 15-20 knt: For me the GO 170 2002 was perfect with a weight of 10,3 kg!!!!! Now the problem: the new GO 170 is much heavier with 12,5 Kg: are the perfomamnce still the same of model 2002, or is oriented to other surf category? What table 2007 have the same perfomance as GO 2002?
Thank you for an answer
RE: New board
you could decide for the CARVE 162. Below 9 kilos and 82,5 wide. The board covers the same windrange, but could push your skills. Just think about and come back, if you should have any questions.
fin for carve 162
Thank you very much,
Now a Carve 162 is in my car and from april severeal time on the lake. It is nice to surf and confortable at the same time!! Now a question: when I surf with my Neilpryde V8 9m2 the board go "quite easy" in spinout. The fin is a original drake 49cm....Do you think I can buy a bigger one? How many cm.? My weight is 75 kg.
Thank you in advance for your answer
fin for carve 162
is there someone that can ask my previeus question? it is important for me to have a feed back about this "small" problem.
thank you very, very much in advance
You can certainly try a larger fin, maybe 3-4 cm longer, to use with your biggest sail. Other less expensive things to look at: the condition of your original fin, and how much you are pushing against the fin with your back foot.
The fin should be "clean" with no dings, nicks, raised print on the fin itself.
Sometimes when you change from one board to a new one with a slightly different design, especially at the tail end, that change will bring to light some techique issue that needs to be resolved. Too much pressure with the back foot, the position of the footstraps, etc.
hope this helps,
|All times are GMT +7. The time now is 11:51 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.