Fin for older Carve 135?
I'm about to update my board quiver to a new 161 and perhaps an Isonic or S-type but currently one of my favorite boards when the wind is up is my 2002 Carve 135, my question is, I have gotten it up to 29.97mph (+-) a number of times but try as I might I can't break the 30mph barrier.... I usually have either a 6.5 V8 or a 8.0 Retro, but I only have the stock 44cm fin. I'm thinking I need a different fin, but don't know what to get. I'm looking for advice in that area, any suggestions would be appreciated. Also, for simple back and forth blasting in the 30+mph range (i'm 5'10" and 175lbs) which would be a better choice? One of the S-Types or an I-sonic?
RE: Fin for older Carve 135?
I was called a liar a few times on here for claiming it but I got my Carve 131 upto 37 mph (Vmax 2 second) and on quite a few occasions. It was with a 32cm fin (Believe it or not a home converted Northshore 32 (Originally powerbox) and with a Saber 6.2 sail.
Carve is one of those boards when apparently coupled with a big sailor (I was 105kg at time) does find a 6th gear so to speak.
My best speed with bigger fin/rig is 33mph with 7.5 Gaastra GTX and 42cm fin.
With right fin you will easily break 30mph.
A 44cm fin with your weight and 30mph plus is a big big fin.
(PS I`ve got even better speeds on F2 PG 130 but again with even smaller fins. (An upright 29 and Flash 5.4 got me 39mph on PG 130(over 10 secs and a 41.5 over 2 !)
I changed back to F2 to get better/cheaper choice of smaller fins.
Having said all that with your weight a smaller board will see even bigger benefits. S type 115 ? Tabou Rocket 115 ? :p
|All times are GMT +7. The time now is 11:24 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.