iSonic 111 and Canefire fins from Vector Fins
 

Has anyone used this fins with this board. Specially sizes 38cm and 42cm?

Anyone???? There got to be someone in the star team that rides for Vector??

Jesper Orth would be the MAN.

HE already did. He recomended the 38 and 42 canefire.

Hi

I have been using the Vector Canefire G-10 fins for 2 years now, -and I can only say that I'm more than satisfyed with their performance on any of the Isonic boards. I use the Canefire G-10 model on all of my boards (from 32-48cm)

Yes -,, I'm on the Vector fins team, but one thing you cant go on compremise with is the fins for your boards. Thats why I have tested (and still is testing) a broad range of fins from different brands (carbon, molded, G-10 etc), to be sure to have the best, but all the time without quistion the Vector fins has the best feeling and performance.

For the Isonic 111 for sure the 42 Canefire for light wind will be great, and the 38 for high wind.

By the way most sailors trying my complete gear setup, nearly always comment's on the fin as the first thing, to tell that they find it slippery and fast, but also very easy to sail.




Jesper

I have seen quite a few top kiteracers using this fin on their boards. They swear for it!

Hi nonopr,
I used Vector Canefire 39 and 43 on my 107 Isonic with 7.8 sail and TR7 8.4xt
I like the 43 better with both sails i felt the 39 was to small for the 7.8 in a light wind 16 to 18 Knts, it could be better when the wind pickup over 20 some knots to go with smaller fin.
I forget to mention that you recommend the Vector fin for me about 5 month ago,
I like the 36 Volt to on my Isonic 90 with TR6 7.0.
Good Sailing Dani.

Forget to mention that i really like the Vector Canefire fins, i use the 39 on my Fanatic Ray 115 LTD with a 7.5 MS2, TR6 7.0 and that rips. :-)