I am going to get a Formula Experience Board, and at least one rig (maybe a 11m), to compliment my only other board (Kode 103).
I would like to enter a few races, (maybe) and for just general cruising about.
I would also like to use for two other things.
1. Light wind practise with a small sail 5 - 6m. Practising rig control etc. The sought of stuff you might use a Starboard RIO for example. Would it be satisfactory?
I would use a second hand cutdown fin if required. Any suggestions on a fin size, or would the racing fin still be fine for this application (don't care about performance/ but still need to be able to manover properly)
I have a Formula 161.
To use a formula board for light wind practising rig control (I suppose for your kid) will offer a lot of stability. You can almost dance on this kind of wide board :).
I don't let my sun of 13 touch my board though. It's much to fragile. A bad crash with the gear can easily cause a crack in the deck.
Watch out with cutdown fins. I've tried once a 50 cm fin in shallow waters. It just doesn't work. The board dances around on the water. You need at least 60 cm or preferrably 70 cm fins. I know it is a pain in shallow waters.
For the Formula Experience, this board are in tufskin so very strong compare to F 161 and for the sail, depend of your weight 10 or 11mē Overdrive.
All the best
|All times are GMT +7. The time now is 03:33 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.