Isonic 133 what fin size for sail size.
Hi, Could anyone please tell me what size of fin I should use for my isonic 133 when using my Tushingham lightning 9.4 and TBird 8m sails.
I am 95kg and power off the fin a lot. :eek:
When using the 9.4 sail I used a 48cm fin and found it would not give me much grip, if thats the word I am looking for, but changed it for a 52cm and was better, I don't know if this is due to putting to much pressure on the fin.
Also what size would you recommend for a 6.5 sail ?
Sorry, you have probably heard this question a thousand times before, but would be very grateful for some help and advise.:)
One more thing, when I bought the board it is for deep tuttle fins, why do you get tuttle fins with it and not deep tuttle.
you need a 50cm fin with your 9.4 for downwind racing. For match up racing with your friends you can go with 52cm.
I recommend this two brands www.vectorfins.com and go with the canefire in carbon molded.
I also recommend www.f4fins.com and there you go with the D2 in carbon XS.
I will never use that board with a 6.5m sail. Will only use it with 8.m sails and bigger all the way to 9.8m.
Many thanks for the info. I use the fin off my futura 144 which is 52cm drake, I don't know if I would notice the difference in fin manufacture, due to me not being a pro, and would cost a lot more money for these fins ?
The fin for the futura is another type of fin not design for the iSonic. It would work but it wont make you board release as it would with a good slalom fin.
I will never use a Drake as they are crap production fins.
|All times are GMT +7. The time now is 09:46 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.