View Single Post
Old 11th August 2007, 08:32 AM   #2
Ian Fox
STARBOARD
 
Join Date: Aug 2006
Posts: 532
Default RE: RDM cam adapters for CR 5.6

Hi VeeDot,

It's possible to use the existing SDM cams and additional spacers to fit for RDM, or change to slightly smaller diameter cams (from upper SDM position/s)and use the extra spacers. The fitment result is not so ideal from a practical rating, as the cam/spacers don't stay so well on the batten interface when rigging/derigging (esp in crazy 5.6m hi winds), and (as you know) the cams are slightly bigger which distort but not damage the luff sleeve.

I agree it's not ideal, and FYI I'm now using SDM400 in CR-R2 5.6m.

Cheers ~ Ian
Ian Fox is offline   Reply With Quote