Thread: Surface repair
View Single Post
Old 19th July 2008, 08:19 AM   #2
Roger
Dream Team - School Guru
 
Join Date: Aug 2006
Posts: 2,105
Default

Hi mgraham,
If you are sure that the "chips" are only through the color coat, then masking them off and repainitng them is the obvious solution.
If the "chips" are deeper, and you can see that the laminations are damaged, then either a professional repair job, or a good DIY (do it yourself) fix to restore the structural integrity of the damaged areas
is what's needed.
What type construction do you have WOOD, DRAM, Technora, or
TufSkin?
The repair techniques differ for each construction.
We can fill you in on what repair techniques to use for each construction.
Check ou the repair section on this website:
Click on: "Products"
"Product Assistance"
"Repair Guide"
Hope this helps,

Last edited by Roger; 19th July 2008 at 10:20 PM.
Roger is offline   Reply With Quote