Did you check your local auto parts store....?
How about looking at your local ball bearing or industrial supply warehouse.
As an alternative, you might be able to find the next size larger PT screw.
The reason so many have stripped this year is the thickness of the footstrap/
K-9 lock/oval toothed washer.
You may be able to fix this if you take a C-clamp and press the oval tooth washer and
K-9 lock into the nylon strapping of the footstrap so the asssembly in much thinner.
Then your existing screws may work OK.
A longer screw very well may solve the problem, just don't go beyond 32 mm as
that's been tested and does not "punch out" the back of the FS insert.
Hope this helps,
Last edited by Roger; 20th December 2008 at 11:12 PM.