1/ Carbon versus wood.
Itís been a long experimental road and most years we build Race boards in wood and also in carbon to see the potential.
I first tried a wood sandwich board in New Caledonia back in 1986 and have been a fan ever after.
This year again we built from the very same Isonic mold , one board in 160 Gr carbon, one in 80 Gr carbon and one in Honey comb sandwich.
The result came out as in previous years, the carbon boards and the honey comb are lighter but not quite as fast as our wood sandwich boards.
In very light winds the materials provide similar potential, but as soon as we got up to speed , wood was a tiny bit faster.
We will keep on cross checking into the future as well, in case some new future carbon technologies prove to be faster.
In wave jumping and freestyle, its probably not so much about speed , but about the ability to jump and move the board in different positions while airborne, and here weight has been found to be important. We found that when we changed the lay up on race boards from wood to carbon we could save 150-300 grams, whereas in wave and freestyle, the boards were 500-800 grams lighter, this quite likely as the Race boards had less reinforcements to be reduced.
An exciting derivate of the wood usage is the dynamic shape stability, and you can read more about that here:
I further think that keeping closer to the shape specifications in the production is a very important goal,
and we have put a couple of new measurement stations in place for that.
2/ Production boards for all riders.
All Starboard riders get normal boards from normal shipments every time.
Last example was Bjoern. He requested boards a couple of days before he traveled to Turkey
and they were again taken straight from the warehouse at APM in Germany,
no extra checking of rocker lines or such. In the future we would want to see if we somehow
could find a way to select the best production boards for our dream team.
Racing is their job and provides their income, thus they at least should be able to receive boards
that are as identical to the master shape as possible.
Thanks for your support