Starboard Forums - View Single Post

Ray Timm · 1st October 2010, 02:05 AM

I fixed a stripped thread on the Quad with JB Weld. Cleaned the hole, filled with JB Weld, then I drilled it out and retapped it. So far still going strong after several months.

1st October 2010, 02:05 AM	#4
Ray Timm Member Join Date: Aug 2006 Posts: 65	I fixed a stripped thread on the Quad with JB Weld. Cleaned the hole, filled with JB Weld, then I drilled it out and retapped it. So far still going strong after several months.