View Single Post
Old 6th November 2010, 05:02 AM   #6
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,445
Default

Hi Hank

The new cam are much thicker near the pin, it' s more than 4 mm thick

To help the rotation make sure that your cam is in the right position when you rig your sail, it should make an angle of 90 degre with the mast. The common problem is that when downhaul the sail you need to help the cam to not make an 45 degre angle

Hope this help

All the best
__________________
Remi

Can answer if you have any questions on this following boards :

Carve 111, 121, 131, 141, 151 & 161
Futura 93, 101, 111, 121, 131 & 141.
iSonic 80, 87, 90, 97, 107, 110, 117 & 130
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

UltraSonic 147
Formula Experience One Design
Phantom Race 377 & 377 L / 320
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phantom 295 L :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Formula 167 :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Racing Serinity Cat Concept
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Remi is offline   Reply With Quote