View Single Post
Old 17th August 2011, 03:12 AM   #6
Ken
Member
 
Join Date: Aug 2006
Location: Dallas, Texas USA
Posts: 799
Default

Thanks guys,

I will try Mark's 3mm drill solution, but I don't know that the epoxy I have is slow drying. It's a West Systems repair kit. The epoxy info says that it will gel in 2-3 hours and cure to a solid state in 5-7 hours at 70 degrees. My house is 80F so it will be a bit faster. Outside it's 103F, so I won't be outside.

It comes with a filler material that can be mixed with the epoxy for a thicker mix. Is this a good idea to fill the hole? Seems like it would be better for filling the void, but would it work better with a thinner mix that will fill all the small voids and possibly attach to the side of the small hole better?
__________________
Toys:
Formula 160; iSonic 111; HiFly Move 105; Tiga 263; '85 Mistral Superlight.
Maui Sails TR 11.0; 9.2; 8.4; 7.6; 6.6; Maui Sails Switch 6.0; 5.2; Maui Sails Global 4.5; 4.0.

Last edited by Ken; 17th August 2011 at 03:20 AM.
Ken is offline   Reply With Quote