View Single Post
Old 22nd August 2011, 10:57 AM   #23
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,426
Default

Hi Nakaniko,

This is a Concept and will be probably never in production for cost problems, basically is on Serenity cut in the middle for 2 reason (try to make as less expensive as possible but also if you have 2 symmetric hulls you can't have the hulls so close due to the waves they will make between the 2 hulls and make slower than the Serenity) so the length is exactly the same. And yes it's possible to reduce the width, you can play on 10cm.
The reason that it's tacking very well is because the center fin is more in front and is narrow than the wide production Serenity fin.
I am still working on it to have it in cheap construction and in 5 pieces, so easy to transport.
About the stability the Serenity is ok under 10 knots but you need already a good skill but here you can use it with Fun until 20 knots even down wind and still stable!!! I didn't have my Go Pro HD at this time but will post another one as soon I can do it.
All the best
__________________
Rémi

Can answer if you have any questions on this following boards :

Carve 111, 121, 131, 141, 151 & 161
Futura 93, 101, 111, 121, 131 & 141.
iSonic 80, 87, 90, 97, 107, 110, 117 & 130
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

UltraSonic 147
Formula Experience One Design
Phantom Race 377 & 377 L / 320
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phantom 295 L :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Formula 167 :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Racing Serinity Cat Concept
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by Remi; 22nd August 2011 at 10:59 AM.
Remi is offline   Reply With Quote