Thread: isonic 2012
View Single Post
Old 5th September 2011, 12:50 PM   #3
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,445
Default

Hi Seb,

Just see your post.

All the change work all together and need time to make them work together, I mean make the board narrow & revise cut aways in the tail have good incidence but bad ones also, so need to revise the thickness in the front of the board to get less lift then you get the perfect balance. All together the performances of the board increase in every sector, Jibbing, exit jibe, Acceleration and top end speed with more control.
For the 117 Wide we make it more narrow also in the tail who was already quiet narrow for 2011 and to avoid your feet glide back we make this heel extender and cancel also the tail kick to get even better control in top end.
If you have other questions, they are welcome

All the best
__________________
Remi

Can answer if you have any questions on this following boards :

Carve 111, 121, 131, 141, 151 & 161
Futura 93, 101, 111, 121, 131 & 141.
iSonic 80, 87, 90, 97, 107, 110, 117 & 130
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

UltraSonic 147
Formula Experience One Design
Phantom Race 377 & 377 L / 320
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phantom 295 L :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Formula 167 :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Racing Serinity Cat Concept
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Remi is offline   Reply With Quote