View Single Post
Old 16th June 2013, 11:02 PM   #3
Roger
Dream Team - School Guru
 
Join Date: Aug 2006
Posts: 2,092
Default

Roger Smith,
If you can find some "penetrating epoxy" it would be better for the type of holes/damage/dry spots you seem to need to patch.
Be sure to put your board out in the sun during the day (with the vent plug open, and make your repairs as the day is cooling off (with the vent plug closed/sealed so the partial vacuum inside the board (from it cooling off) will "pull" the penetrating epoxy into the pores/holes/cracks.
Check <www.boardlady.com> for the product info.
Roger

Last edited by Roger; 16th June 2013 at 11:04 PM.
Roger is offline   Reply With Quote