View Single Post
Old 18th January 2014, 07:44 PM   #3
rww
Member
 
Join Date: Dec 2011
Location: Boreen Point, Queensland, Australia
Posts: 46
Default

Thanks Joe

Have tested on land. Board can be dropped, but there is too much friction (even with silicon spray) to do so with the "handle" until it is quite a long way out. Only way I can get it down is by pulling on the tip until it is far enough out to use handle. Am hoping it will loosen up, but it's not looking promising at this stage.

Can any team members suggest what the problem might be?
__________________
iSonic 76,107 Phantom 295L
NP RS Slalom 5.5, 6.2, 7.0, 7.8
rww is offline   Reply With Quote