View Single Post
Old 27th February 2014, 01:16 AM   #9
mark h
Member
 
Join Date: Aug 2006
Location: NW England,
Posts: 720
Default

Hi Ittiandro

Not sure what you mean by "inner tube"' but if you are shortening a boom, you will be cutting the arms shorter, this means you will need two new clip assemblies. Sometimes you can get the old clips off, but it's usually better to make sure that you have a pair off spar clips. Unless it's a Fiberspar boom, you would need to drill new holes for the located pins.
__________________
Cheers - Mark H

The toys:
Speed W44 - Speed W49 - speed W53 - speed W58 - iS76 - iS107 - iS137 - F161.
North Warps: F2012 5.2m, 5.7m, 6.3m, 7m, 7.8m, 8.6m, 9.5m F2006 11m.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
mark h is offline   Reply With Quote