|28th March 2014, 06:45 PM||#2|
This greatly depends on what you want with the board.
I use the Atom 110 for comfort-speedsurfing:
Front and back footstrap in outer row
Front footstrap in screw most behind
Back footstrap in screw second from behind
Fin is good for allround freeriding etc and will work with your sailsizes.
If you want to surf fast in a straight line the fin is to soft and a stiffer, more stable fin will work better I guess.
|4th April 2014, 11:21 AM||#3|
Join Date: Apr 2010
Hi unregistered, I am around the same weight and height as you and I use the middle set on both the forward/aft and inboard/outboard setting and the mast base position bang in the centre and this worked for me. Maybe if you are doing more blasting in flatter conditions then the outboard strap position should be considered. As for fin sizes, I have only used this board with a 6.7 to date so cannot really say for sure but am guessing that the purchase of a slightly larger fin for the 7.5 would help.
2011 Neil Pryde Atlas 4.2, Fusion 4.9, 5.5, 6.1, 6.7. 2014 Severne Overdrives 7.0, 7.8, 8.6 & 9.5
2011 RRD 101 FSW, 2013 Fanatic Skate 109L, 2014 Starboard isonic 110, 2014 Starboard AtomIQ 110 & 2014 Starboard Ultrasonic 147
|Thread||Thread Starter||Forum||Replies||Last Post|
|atom iq||Unregistered||Free Forum||0||8th October 2013 01:16 PM|
|Atom Fin Box||Unregistered||Free Forum||6||20th May 2011 06:08 AM|
|atom||manuveto||French Forum||4||14th September 2010 02:28 AM|
|Atom||Frederic||Ask Our Team||0||13th September 2010 05:19 AM|
|Atom||Unregistered||Free Forum||0||11th December 2009 04:15 PM|