Go Back   Starboard Forums > Ask Our Team

Reply
 
Thread Tools Display Modes
Old 1st September 2007, 10:19 PM   #1
theo winter
New Member
 
Join Date: Jul 2007
Posts: 3
Default fin size for NP 9.8 on isonic 133?

I'm wondering whether the standard 48 drake fin with the I sonic 133 is big enough when using my NP V8 9.8 on the board. Broad reaching is ok, however going upwind results in many spin outs, regardles of changes in footstrap position. I weigh 104 kg's, 1.99 m tall and subsequently use the IS 133 with the 9.8 when many other sailors are down to for instance 7.5's, so a lot of pressure on the fin.

In the 2008 catalogue I see that for the " new" Isonic 133 also 80 wide the recommended fin range has expanded upward. So now I'm thinking of a Select gold 56 or something along that line. What to do?
theo winter is offline   Reply With Quote
Old 3rd September 2007, 04:50 AM   #2
Maximus
Member
 
Join Date: Aug 2006
Location: Australia
Posts: 162
Default

Hi

At your weight I would say 56 would be a good size for a 9.8 v8. Just make sure that the V8 is downhauled to max. Use the outhaul for triming. If the sail is set incorrectly this will also create a lot of spin outs. Also at your size and weight make sure that the track position is near the front.
Maximus is offline   Reply With Quote
Old 3rd September 2007, 12:46 PM   #3
Jean-Marc
TEAM
 
Join Date: Aug 2006
Posts: 1,271
Default

Theo,

Which year your iSonic 133 ?
If 2007, don't go bigger than 52-54 cm (54 cm OFO).
If 2008, a 56 cm fin might be OK (57 cm OFO).

BTW, Rémi is using a 52 cm max fin on both iSonic 133 with CR2 10 m2 sail, mainly because too large a fin is slow for top speed slalom racing.

Cheers !

JM

Last edited by Jean-Marc; 3rd September 2007 at 12:49 PM.
Jean-Marc is offline   Reply With Quote
Old 6th September 2007, 03:00 AM   #4
theo winter
New Member
 
Join Date: Jul 2007
Posts: 3
Default

THank's guys for your reply, I'll go for the bigger fin and then see how it goes!
theo winter is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 11:21 AM.