Go Back   Starboard Forums > Free Forum

Reply
 
Thread Tools Display Modes
Old 26th March 2010, 09:29 PM   #1
eric b 125
Member
 
Join Date: Dec 2009
Posts: 55
Default mast foot: the last thing i need to get wet

have a final order before i'm ready for the lake. i've already researched the harness and extension, as well as the difference b/w tendon and mechanical. my question is: single bolt 'twist-on' base, or two bolt? i'm guessing the two-bolt is better, because in my mind the single bolt has the potential to un-twist at inoppurtune times.
eric b 125 is offline   Reply With Quote
Old 26th March 2010, 09:45 PM   #2
mike
Member
 
Join Date: Sep 2006
Posts: 66
Default

Yep, what you say is my experience. Actually I went for a number of years with no problem with single bolt - always made sure I tightened it really well. Then on a newer one, it did slip or overtighten occasionally. I'm thinking this was due to the small ridges on the plate you press with your thumbs to tighten - perhaps I wasn't getting it as tight?? Went to 2 bolt - no problem.
mike is offline   Reply With Quote
Old 26th March 2010, 10:35 PM   #3
eric b 125
Member
 
Join Date: Dec 2009
Posts: 55
Default

thanks for the quick response mike! guess i'll go with the two bolt.
eric b 125 is offline   Reply With Quote
Old 27th March 2010, 11:24 AM   #4
Roger
Dream Team - School Guru
 
Join Date: Aug 2006
Posts: 2,110
Default

Hi Eric,
There are 2 "flavors" of single bolt twist on mast base plates.
The good ones are "on center" (the bolt that engages the nut down in the mast box
is directly on center with the tendon or rubber uni joint.
The ones that tend to "unscrew" are the ones with the clamping stud off center from the tendon or uni joint.
Lots of people like the 2 bolt models, but they tend to restrict the amount of fore and aft adjustment in your mast slot by around 4".
This can put your mast base in a not so good place on many of the newer boards with very short mast slots.
The 2 bolt bases are most often used by wave sailors.
Slalom racers, formula racers (with huge 10-12.5 m2 rigs) and most back and forth sailors use on center, single bolt, bases to avoid the mast slot length/postioning issue.
The single bolt bases are plenty strong enough unless you are wavesailing where the board and rig are likely to get "rolled" by the surf.
Hope this helps,
Roger is offline   Reply With Quote
Old 28th March 2010, 08:40 PM   #5
eric b 125
Member
 
Join Date: Dec 2009
Posts: 55
Default

roger, thats pretty interesting. i didnt even think about how the two bolt would restrict adjustment. i actually already ordered the two bolt, before i read your response. i read that at my skill level i should probably just keep the sail at the recommended position on my futura 144, at least until i get some techniques down.
also, after hearing the good, bad, and ugly about the deviator i went ahead and bought one, and a two bolt was also recommended for that. whether i'm going to use the deviator or not is something i'm still debating. i wanted some sort of nose protection but i didnt want to have a cracked nose that couldnt be seen b/c of a nose guard. someone told me that i should either hold onto the sail, or let go of it (cant remember which one) when getting launched, to prevent the impact to the nose of the board...?
eric b 125 is offline   Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Roger mast foot forward to go upwind? Crash Ask Our Team 6 30th October 2008 04:55 AM
Isonic mast foot position ianb Ask Our Team 1 12th August 2007 10:14 PM
Just one more thing...evo deck. Roly Gardner Windsurfing School 7 13th July 2007 02:44 PM
Am I right about the mast foot position all the way back on an F-type? Guest Free Forum 18 2nd July 2007 02:42 AM
the toes up thing windsurferdagg Windsurfing School 8 18th April 2007 07:23 PM


All times are GMT +7. The time now is 07:21 PM.