|21st July 2011, 12:31 AM||#1|
Join Date: Aug 2006
Moving straps inboard on iSonic 2010
I took out my iSonic 101 2010 for a first time yesterday. Great, fast board - BUT - because of my huge, thick bootied feet, I'm having hard time getting out of the front straps during the jibes. I'm going to try widening the strap by moving to one hole wide, per Roger's instructions.
However, I wonder if it would help to set the footstrap at the outer screw hole, rather than at the center. The straps have three holes for the screws. If I use a regular washer, rather than the serrated metal bar provided with the board, I should be able to set the footstrap screw at the outer edge of the footstrap. This would have the effect of moving the strap a little bit inboard.
Is this a doomed idea? Thanks for any advice!
|Thread||Thread Starter||Forum||Replies||Last Post|
|Inboard footstraps = Easier to plane through jibes?||agrelon||Free Forum||5||20th April 2010 01:54 AM|
|Phantom Race 380 2010 Foot Straps||Glyn||Ask Our Team||1||6th April 2010 01:53 PM|
|Is AA moving to JP ?||Polis||Free Forum||61||24th May 2009 12:26 PM|
|Moving to Guam - 12' 6" or Mr. Easy?||Second Wind||Do it standing up! The Stand Up Paddling Forum||4||24th October 2008 03:27 AM|
|iSonic straps||Screamer||Free Forum||2||26th April 2008 06:58 PM|